• Published: 27 October 2018
  • Hi, im a Pensioner . Apart from my work i like DIY stuff, lifehacks, how to make, experiments, well everything that can be made by hand in a home enviorment. This channel " Rough Hands and Unusual Ideas " about new and old ideas that you might have known . This channel is a HACK COLLECTION. It’s an entartainment oriented channel, so do not try to repeat at home everything you see, as it might be dangerous. So take care of your health.
  • Science and Technology Science and Technology

Comments • 316

  • Paul Barron
    Paul Barron  2 weeks back

    A piece of electrical tape does the job gauging the depth needed on a drill bit and saves making this bullshit contraption lol

    • D3M0ify
      D3M0ify  3 weeks back

      Mute instant - lame music

      • vrod1a
        vrod1a  1 months back

        Excellent! 👍

        • MikE WhiskeY
          MikE WhiskeY  1 months back

          Stupid me I thought for sure it was a home version Phaiser.

          • Russell Youngblood
            Russell Youngblood  1 months back

            What is the point of this invention? In what way would this help u drill holes? I have never needed help drilling holes unless Im using a hammer drill through a concrete wall

            • John Kellum
              John Kellum  2 months back

              Tore up my elbow swinging a dishing hammer so I made a power hammer...

              • David Goeken
                David Goeken  2 months back

                Wow I wish I could buy one of these. All of the bad comments besides the safety. This device has so many great uses. I like the idea of being able to hold down the project that you are drilling. If you have ever drilled into a pipe and have the drill move around, this would certainly help. Yes they make a hammer and a punch before I get a comment 😁 this is a versatile tool that has many uses. I also enjoyed how he re-used old items.

                • Dwayne Arthur
                  Dwayne Arthur  2 months back

                  well ain't that nifty! I like it

                  • Wolfgang Michaelis
                    Wolfgang Michaelis  2 months back

                    Click bait level 9000. Making it look like a makeshift gun

                    • Mitch Batten
                      Mitch Batten  2 months back

                      Sure, it might be accurate close up but I bet you couldn’t hit the broad side of a barn at 50 yds. with that thing.

                      • Milo Conservative
                        Milo Conservative  2 months back

                        WTF wasted my time

                        • DRON133 S
                          DRON133 S  2 months back

                          Its a fake gun to fool robbers

                          • 1953PE
                            1953PE  3 months back

                            after all that a poxy depth gauge

                            • Slash McCoy
                              Slash McCoy  3 months back

                              At least I wasn't stupid enough to sit through the whole thing. Skipped from 1:16 to 6:38. PUT WHAT YOU ARE DOING IN THE TITLE! Don't be an idiot and don't assume that we are. Okay, yeah, it is stupid to click a vid without a title. But sometimes mistakes are made. No, your "drill press" or drill stop or whatever is NOT something that needs to be in every home, and you aren't the first guy to make one. The first guy to make one was the first guy who needed one. Which was probably the day after the first hand drill was ever sold. Stop wasting our time. If you want to waste yours, go ahead. leave your phone somewhere else where it won't get damaged and you won't be tempted to record stoopid stuff. Youtube should take your posting privileges away from you and all the other morons that do the same thing. I am trying to be nice here, but it sure is difficult. Okay, back to watching Indian contortionists and gold prospectors and 4 year old North Korean musical prodigies.

                              • Jens Rasmussen
                                Jens Rasmussen  3 months back

                                A lot of work to create what usually comes with the drill.

                                • Heavens to Murgatroyd
                                  Heavens to Murgatroyd  3 months back

                                  Are you a midget or is that vice from the planet of the Giants?.........what's next a flying machine from used plumbing parts?

                                  • les allan
                                    les allan  3 months back

                                    To much time on your hands

                                    • Yah Saves
                                      Yah Saves  3 months back

                                      Put a piece of tape on the drill bit to the desired depth and be done with it.

                                      • Justin H
                                        Justin H  3 months back

                                        im locked out of my car and just as the most important part of the video i was watching that demonstrates how to resolve my issue a still picture ad of your video blocks my screen. did i mention i have limited, decreasing battery. if i dont get in my car tonight, someone please tell youtube their ads are extremely annoying DURRING A VIDEO THATS ALREADY BEING PLAYED. if i gotta wait for an irrelevant ad how come yall cant wait for my desired video..?

                                        • Grolem M
                                          Grolem M  3 months back

                                          not many people have the tools to make this

                                          • Tom Lyon
                                            Tom Lyon  3 months back

                                            Grolem M you don't need to make one. They sell them at hardware stores.

                                        • Denis Palmer
                                          Denis Palmer  3 months back

                                          why the crap noise I hate needing to turn off the shit to watch a video.

                                          • Liam Miller
                                            Liam Miller  4 months back

                                            Interesting concept. I might use my powerarc and make a variant of this.

                                            • J Battler
                                              J Battler  4 months back

                                              It would be actually useful if one knew what you are making...

                                              • Brian Schnoor
                                                Brian Schnoor  4 months back

                                                Very interesting.

                                                • Patrick Freeman
                                                  Patrick Freeman  5 months back

                                                  I think it's a great idea. perpendicular drill guide and T-square in one, awesome. Now I need to figure out how to do it without a welder. Maybe JB weld?

                                                  • Larry Riffett
                                                    Larry Riffett  5 months back

                                                    Dumb waste of time.

                                                    • rideordieguy rideordieguy

                                                      was enjoying till that mouth noise YACKKKK BYE

                                                      • AnyWho
                                                        AnyWho  5 months back

                                                        i think its a drill press but i cant say for sure tho cuz the moron covered up the main viewing area with more links blocking the device ...

                                                        • Julie Leulliot
                                                          Julie Leulliot  5 months back

                                                          So this guy has a grinder, welder and would have to guess much more and he has no drill press? If you have all those tools, I guess this is a project. If you have no access to a drill press and need this tool you would most likely not own all the tools needed to build it.

                                                          • Chester
                                                            Chester  5 months back

                                                            Great to watch the male mind in action.  Nice job but a lot of work.

                                                            • pasqualeredo
                                                              pasqualeredo  5 months back

                                                              Wtf isit and what's it supposed to do? WASTE OF TIME

                                                              • Tony Lewis
                                                                Tony Lewis  4 months back

                                                                its a guide so you drill straight holes. ( and how can you say it its a waste of time if you dont even know what it is? Educate yourself before you make stupid statements )

                                                            • Elizabeth McKenna
                                                              Elizabeth McKenna  5 months back

                                                              Thanks for blocking my view of the video I was watching idiot.

                                                              • Heather65 Renwick
                                                                Heather65 Renwick  5 months back

                                                                For all the haters. Instead of commenting rudely it’s best to keep it to yourself. This gentleman uses his imagination, he shares his ideas and talents with us. What will you all turn out to be when you are a pensioner. Will you use your imagination , if you have one, or will just sit on the porch drinking booze and smoking cigarettes? Be respectful. You don’t know what this gentleman’s life was like but you criticize. I very much appreciate this gentleman and love his ideas. He is contributing to society. What are you haters doing besides hating. Make this world a better place like this man is 🥰💕

                                                                • Bernard MICHEL
                                                                  Bernard MICHEL  5 months back

                                                                  Really boring to see a guy doing something you do not know anything about , not even what is going the use of it !!! And we have to try to discover what he has done !!! Please !!!

                                                                  • William Charles
                                                                    William Charles  6 months back

                                                                    Nice device, I wonder why you don't apply for a patent. You may also find it easier to weld your projects with a small flux core MIG welder. You can probably find a used one for $60 US.

                                                                    • Kenneth Stevenson
                                                                      Kenneth Stevenson  6 months back

                                                                      When you are cutting the square tube with the grinding wheel you should wear gloves and grab the handle of the grinder in such a way so your hand or arm is not crossing the arc of the cutting wheel. You could suffer a serious injury if the cutter would bind when you are in this position. You look like an experienced fabricator , I am surprised that you have not suffered serious injury. Don't operate a chainsaw with body parts crossing the plane of the cutter, you could loose body parts or even your life.

                                                                      • Chris Daniels
                                                                        Chris Daniels  6 months back

                                                                        Kenneth Stevenson it out the guard back in the grinder but I don’t think he likes the guard. It gets in the way.

                                                                    • Bob Marshall
                                                                      Bob Marshall  6 months back

                                                                      The angle grinder with the guard removed is just asking for trouble!

                                                                      • Ace Handler
                                                                        Ace Handler  6 months back

                                                                        No gloves and bare feet too!

                                                                    • windy pup
                                                                      windy pup  7 months back

                                                                      Better drills have built in depth gauge bars, you can also buy rings that fit drill bits allowing you to control depth or buy a pillar drill. This rubbish is called 're-inventing the wheel.'

                                                                      • Hans van de Riet
                                                                        Hans van de Riet  7 months back

                                                                        Very nice, but I wish he would show more consciousness regarding safety.
                                                                        PLS man put a safety guard on the angle grinder especially with those thin discs.

                                                                        • Canis Poetam
                                                                          Canis Poetam  7 months back

                                                                          He hasn't marked the square for length.
                                                                          What good is a squarer without a scale?
                                                                          That's just wrong.


                                                                          • Brutally Honest
                                                                            Brutally Honest  7 months back

                                                                            You mean to tell me you have an arc wielder, bench vise, grinder, diamond rotor cutter and you don’t own a drill press 🤷‍♂️ so you need to use all that shit just to make a home made drill press 🤣🤣🤣🤣 uh if you invested in all those other machines would it hurt to buy a drill press 🤔🤣🤣🤣🤣🤣🤣🤣

                                                                            • Brutally Honest
                                                                              Brutally Honest  7 months back

                                                                              Who the hell has all those tools and machines especially if you live in an apartment 🤣🤣🤣🤣

                                                                              • John Conrad
                                                                                John Conrad  7 months back

                                                                                so much time and energy wasted!! You could have put a tube cut to size on the drill. it would have stopped the drill just where you wanted it,

                                                                                • Ozzie Wozzie Original
                                                                                  Ozzie Wozzie Original  7 months back

                                                                                  music to noisy

                                                                                  • John Morrison
                                                                                    John Morrison  7 months back

                                                                                    how this gets over 1000000 views is beyond me , gives you a 90 angle in one direction only, more shit

                                                                                    • Barry Jensen
                                                                                      Barry Jensen  8 months back

                                                                                      Yes I just DON'T happen to have a vise, welder, or 2-3 hours to make something like this

                                                                                      • Jimmy Phelps
                                                                                        Jimmy Phelps  8 months back

                                                                                        yhoughy for sure a zip gun were is a video for zip gun?